Storage Bench With Drawer Plans
Difficulty
Intermediate
| 
The easiest style to build a mudroom demote with drawers. Free plans by ANA-WHITE.com
Maximize the functionality and storage in your mudroom with a new mudroom bench with drawers. This easy to build drawer bench will add a ton of very accessible storage and provide a comfortable bench in your mudroom. The costless plans are below.
Nothing similar falling snow to motivate you to tackle your mudroom organisation arrangement.
Especially when it looks similar this.
Especially when information technology'south below zero and at that place'due south a few inches of snow on the ground.
Peculiarly if you've got a downwards coat problem. And 2 kids in ice hockey. And yous alive in Alaska.
I love drawers for any storage beneath the genu - otherwise, I finish up on my easily and knees earthworks stuff out. And since the space allows for a deep demote and I particularly don't desire to be on my easily and knees digging something out two feet dorsum, drawers are a must build for our space.
But drawers can be a little bit of a pain - and alot of wasted material. And so nosotros did something a little different this time.
We built these two frames out of 2x4s. Just chop up 2x4s with a chop saw and screw them together.
Then nosotros screwed/nailed plywood to the sides.
Then we installed some drawer slides within the 2x4 frames.
And then we congenital drawer boxes out of 1x10s and added the other part (drawer member) of the slide to the drawer.
Drawer goes in the slide ... Top goes on the peak ...
Instead of building a drawer face up, we just built these frames ...
And nailed them to the front of the drawer box.
Two coats of pigment (with a fine sanding in between) and we congenital this!
There'south lots of ways to build a bench with drawers, but this is how I'thou doing it for now on. This was the fastest easiest method I've ever done.
If you desire to run into us build this bench, we did a video on it besides -
And if you lot are ready to build, the gratuitous plans are below.
Please share if y'all build, it makes our day (and helps other diyers out too) when you share your projects!
UPDATE: We congenital a hutch for over the drawer demote.
The plans for the mudroom hutch cabinet are hither.
Dimensions
Dimensions shown above.
Preparation
Shopping List
one -sheet of three/4" plywood cabinet course, 48" x 96" - ripped into 2 strips, 96" ten 23-7/eight"
5 - 2x4 @ 8 anxiety long
iii - 1x10 @ eight feet long
48" 10 48" sheet of 1/four" plywood (for drawer bottoms)
12 anxiety of 1x2 boards
6 feet of 1x4 board
two - 1x3 @ 8 feet long
3 - total extension side mount drawer slides
3 knobs or handles
3" screws (well-nigh 40)
Common Materials
two i/two inch screws
3/4 inch finish nails
1 1/4 inch finish nails
Cutting List
FRAMES
4 - 2x4 @ seventy-ane/2"
8 - 2x4 @ 14-1/4"
SIDES/Top
2 - 3/4" plywood @ 23-7/8" x 17-one/4"
ane - three/4" plywood @ 23-7/viii" x 72"
DRAWERS - Cutting TO FIT!!!
6 - 1x10 @ 23-7/8"
vi - 1x10 @ 19"
3 - one/4" plywood @ 23-vii/viii" x 20-i/two"
Face up FRAME
1 - 1x2 @ 72"
1 - 1x4 @ 72"
4 - 1x2 @ 13"
DOOR FACE FRAMES
half dozen - 1x3 @ approx 12-three/4"
iv - 1x3 @ approx 17" - end drawers
ii - 1x3 @ approx 16-ane/iv" - middle drawer
Cutting Instructions
For the iii/4" plywood - first rip the plywood into ii pieces, 96" long x 23-7/viii" wide. Then cantankerous cut to get the pieces in the cut listing.
Instructions
Step 1
Cut the 2x4 pieces with a compound miter saw. Build the two frames so they match exactly - this is important for the drawers to slide straight. I used 3" cocky tapping screws. You can also use a Kreg Jig with the 1-1/2" material setting and two-1/2" pocket hole screws.
Footstep 2
Attach the plywood to the ends. I used screws (2" length) but y'all can also use nails and mucilage.
Step 3
Read the instructions with your drawer slides and build drawers to fit your slides and opening. The measurements prove are for standard 1/ii" clearance drawer slides with iii/4" thick 1x10s.
If using a Kreg Jig to build the drawer box, place pocket holes on the inside of the forepart of the drawer. You tin still place on the exterior on the dorsum. I used a Kreg Jig ready for iii/4" thick cloth and i-1/4" pocket hole screws.
I used a stapler with 3/4" narrow crown staples to adhere the bottom with glue. You tin also employ a brad nailer with 3/4" brad nails and glue.
Stride 4
Identify 2x4 scraps inside the bench as shown. Place the chiffonier fellow member of the drawer slide on top of the 2x4 and attach to the inside of the cabinet.
Step v
Step 6
Test the fit of the drawer in the demote. Adjust if necessary until drawer slides smoothly.
Step 7
Adhere top to the demote with 1-ane/four" brad nails and glue. You lot can also use screws or staples - they volition just exist harder to hide.
Step eight
Build the face frame first using a Kreg Jig prepare on the 3/4" setting with 1-i/four" pocket hole screws. Attach the completed face frame to the forepart of the project with one-1/4" brad nails and gum.
Step 9
Build the drawer face up frames and attach to the drawer boxes with an fifty-fifty one/8" gap on all sides with one-1/4" brad nails and glue.
Source: https://ana-white.com/woodworking-projects/mudroom-bench-easy-drawers
0 Response to "Storage Bench With Drawer Plans"
Post a Comment